10pcs FFP3 Oxyline X 310 SV RD

Half mask mask filter mask with reusable valve / EN149: 2001 + A1: 2009

Filtering half mask X 310 SV FFP3 RD reusable manufacturer's references: RD - Reusable; N RD - Non Reusable; D - half mask designed to work in a dusty room.

FFP3 FILTER - filtration class recommended by the World Health Organization. The filtration level is suitable for use in infectious wards as well as in medical facilities.

The level of filtration by individual groups: FFP3 99.95%; FFP2 94%; FFP1 80%. FFP3 masks help protect against viruses and their spread.

DESTINY

The X 310 SV FFP3 RD filtering half mask is designed to protect the respiratory system against aerosols of solid particles, water-based aerosols (dust, smoke) and aerosols with liquid dispersed phase (mists) for which NDS is ≥0.05mg / m3 as long as the concentration of the phase dissipated does not exceed 30 x TLV.

P RARE APPLICATION

High concentration of respirable dust, used for welding and soldering, protects against dust containing: beryllium, antimony, arsenic, cadmium, cobalt, nickel, radium, strychnine, radioactive particles.

CHARACTERISTIC

The filtering half mask X 310 SV FFP3 RD consists of:

• multi-layer polypropylene filter material;

• a nose clip for formatting the half-mask in the area of the nose;

• plastic exhaust valve;

• headband made of braided rubber threads;

• fastening of the headband made of plastic;

• nose seal made of polyurethane foam.

• an internal insert, improving tightness and comfort of use. The half-mask is designed in such a way that it is easy to breathe in it during the entire work shift. Due to its anatomical shape, the nose clip and the foam underneath, the half mask is easy to adjust for most face shapes to ensure the necessary seal.

REQUIREMENTS

OXYLINE half masks are compatible with:

• European harmonized standard PN-EN 149: 2001 + A1: 2010 (EN 149: 2001 + A1: 2009) "Respiratory protection equipment - Filtering half masks for protection against particles. Requirements, testing, marking ";

• EU harmonization legislation: Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016. on personal protective equipment and repealing Council Directive 89/686 / EEC on the approximation of the laws of the Member States relating to personal protective equipment, introduced in Poland under the Act of August 30, 2002 (Journal Of Laws No. 166, item 1360) and the ordinance of the Minister of Economy of December 21, 2005 (Journal Of Laws of 2008, No. 259, item 2173) replacing of March 31, 2003 (Journal Of Laws No. 80, item 725).

USE AND STORAGE

The half-masks should be stored at temperatures between -20 ° C and + 40 ° C and humidity below 70%. Before using the half-mask, check its technical condition: whether its elements are damaged. Damaged half masks and those whose expiry date has been exceeded cannot be used. The half mask should not be folded or folded. In order to ensure the best possible tightness of the face piece, the half-masks should be put on and adjusted according to the following scheme:

1. before putting on the half-mask, pre-shape the nose clip by tightening it, which improves the subsequent fit of the half-mask to the face,

2. position the face-piece so that it covers the mouth and nose

3. put on the headbands so that the lower band covers the neck below the ear, and the upper one passes over the back of the head above the ear;

4. adjust the pre-formed nose clip to ensure tightness;

5. check the correctness of the assumption; put your hands on and hold the canopy; blow the air out strongly; in case of leakage, adjust the position of the canopy, nose clip or headband.