CYKLOP 2 + UWN070 CRANE WITH A STACK SEMI COMERCIAL HMS

17-51-101

CYKLOP 2 SEMI COMMERCIAL

At every gym, in every fitness club, there is a device that enjoys great popularity. A device supporting beginners in exercises, and advanced users, guaranteeing many opportunities to diversify the training. I am talking about the Smith Machine.

Its origins date back to the 1950s. The design of the Smith Machine introduces completely new possibilities to strength training. This is mainly due to the combination of the sliding mechanism with the bar and the safety system. Modern Smith machine models are usually equipped with additional elements. This means that when deciding to purchase an overhead crane, we can receive a device for a comprehensive training of the whole body.

Such a comprehensive device is offered by the HMS brand.

We present the CYKLOP 2 HMS gantry cranes which is a stable Semi Commercial class device. The equipment is ideal for commercial use in small fitness clubs as well as at home. It is a device combining the classic Smith Crane with lifts, thanks to which the training will be 100% performed.

CYKLOP 2 guarantees a whole range of exercises for all muscle groups. A barbell, bar, two height-adjustable pulleys will allow you to perform a huge amount of exercises. The number of accessories attached to the device guarantees the involvement of the trained muscles at different angles, thanks to which we will fully develop the muscles and all their muscle heads. In addition, the accessories significantly enlarge and diversify the list of exercises that can be performed. Each movement on the crane will be safe thanks to all the safeguards and belts installed in the device. The crane also has hangers and a special free barbell holder, thanks to which free weight training is also possible. The construction of CYKLOPA 2 is perfect for cooperation with a bench. The bench will provide a lot of additional possibilities to enrich the list of exercises that can be performed on the crane.

The product is additionally equipped with a special plate, which is attached to the crane along with the rails. Another accessory that enhances the exercise possibilities of the CYKLOPA2. The plate is mounted to the bar, thanks to which it is possible to press the bar upwards with the legs, lying on the mat. Installation is very simple, and additional security guarantees safety. Due to the position of the body during the exercise, not only the quadriceps are involved, but also the gluteal muscles. In this exercise, the buttock stretches a lot during the movement, which affects the effectiveness. The greater the range of motion and the stronger the stretching of the muscle, the better the training results.

CYKLOP 2 was made of the highest quality materials that guarantee safety, stability and comfort during training. The gantry crane is very quiet and the linear bearings in its mechanism guarantee perfect fluidity. Its ergonomic shape will allow you to choose the optimal positions for exercises. The pulleys of the pulleys rotate with the movement of the exerciser, which makes the exercise even more smooth and natural.

There is no other machine like this that can perform so many exercises in such a small area.

This revolutionary device will meet the expectations of even the most demanding users.

Equipment for comprehensive exercise of the upper and lower muscle groups:

Shoulders

Chest

Ridge

Biceps

Triceps

Stomach

Spine extensor

Buttock

Quadriceps thighs

Two-headed thighs

Specification:

Product dimensions:

length: 1938 mm

width: 1516 mm

height: 2167 mm

Main frame: 50x50x2.5mm

Neck:

length: 194 cm

diameter: 31 mm

weight: 20 kg

Plate:

Material: steel

Board dimensions:

Length: 40 cm

Width: 50 cm

Height: 14 cm

Bearings in all pulleys

Linear bearings in the crane mechanism

Type of load: two load piles of 90 kg, adjustable every 6 kg

Holders for hanging free weights with a diameter of 50 and 25 mm

Bar guides with safety mechanism

Cable tension adjustment

Belaying: 14 steps

Barbell supports

Possibility of training with a bench

Finish: powder coating

The maximum load of the lift is 900 kg

Maximum user weight: 160 kg

Product weight: net: 369.5 kg, gross: 388.5 kg

Minimum room height for free assembly: 227 cm

The minimum width of the room for easy mounting of the bar: 240 cm

Exercise equipment:

Smith's Gantry

Two height-adjustable lifts

Rod

Foot press plate

Accessory List:

Straight bar attached to two pulleys x 1

Broken bar that can be attached to two pulleys x 1

Long straight bar x 1

Short straight bar x 1

Metal single handle x 2

Cloth single handle x 2

Triangular handle x 1

Double cord x 1

Single rope x 1

Crunch Sleeves x 1

Double handle x 1

Ankle strap x 1

Neck cover x 1

Impression plate

Remarks:

Semi Commercial

24-month warranty for home use

12 months warranty for commercial use

Parameters

• Warranty : 24